Updated Featured KOMA Elektronik Haloplane: a sampler you play with electromagnetic pickups

Eurorack Modules

Bastl 1999: a USB and TRS MIDI expander for the Neo Trinity

Bastl Instruments releases the 1999, a 2HP Eurorack expander that adds USB-C and TRS MIDI to the Neo Trinity: MIDI to CV, CV to MIDI and MIDI clock, at €148.83 including tax from the maker.

The 2HP Bastl 1999 Eurorack module, with its TRS MIDI jacks and USB-C port on the front panel
Image: Bastl Instruments (official 1999 product page).

Bastl Instruments has released the 1999, a 2HP Eurorack module that adds MIDI inputs and outputs over USB-C and TRS minijack to its Neo Trinity modulation hub. Together with the new Neo Trinity firmware 2.0, it turns the hub into a bridge between a modular system, a groovebox and a DAW. The module is listed at €148.83 including tax (€123 before tax) on the manufacturer’s store. This article is based on Bastl Instruments’ official product page.

Who it is for

The 1999 is not a standalone module: it only works with one or more Neo Trinity units, Bastl’s six-channel module in which each channel can be an LFO, an envelope generator or a knob-movement recorder. It is aimed at musicians who already own a Neo Trinity, or are considering one, and want to connect their Eurorack case to a computer or groovebox without adding a separate MIDI interface. If the format itself is new to you, our guide Eurorack explained and choosing a first case covers the basics.

What the module does

Where the Bastl 1999 sits in a hybrid setup DAW or groovebox computer, controller Bastl 1999 USB-C and TRS MIDI Neo Trinity firmware 2.0 Eurorack system CV and gate The 1999 connects to the back of the Neo Trinity, no front-panel patching MIDI runs both ways: MIDI to CV and CV to MIDI
Where the 1999 sits between the computer and the modular system. Diagram: Synth News, based on the Bastl Instruments product page.

Connections

  • TRS MIDI in and out, Type A wiring; the input is optically isolated to reduce USB ground-loop noise.
  • USB-C switchable between device mode (connected to a computer) and host mode (a USB controller or synth plugs straight into the module). In host mode the module powers the connected device with up to 5V / 0.75A; a forced host mode without bus power is available for noise-sensitive setups.
  • Connection to the Neo Trinity through rear headers: no front-panel patching between the two modules.

What firmware 2.0 unlocks

Control voltage, or CV, is the electrical voltage that drives a parameter in a modular system; a gate is the signal that says when a note starts and stops (see our guide CV and gate explained). With the 1999, the Neo Trinity can:

  • convert MIDI to CV and gate, and turn a CV/gate pair into MIDI notes sent to other gear;
  • record CV/gate sequences played over MIDI, or from external voltages received on its E and F channels;
  • take MIDI CC to automate its parameters, send its knob movements to external gear, and change preset banks;
  • handle MIDI clock: automatic source detection, a choice between USB and TRS, clock forwarding, and conversion of the internal clock or an analog clock into MIDI clock, including Start and Stop.

Several Neo Trinity units can be chained behind a single 1999, with MIDI channels assigned automatically according to each module’s position in the chain.

Specifications

ItemBastl 1999
Width2HP
Depth24 mm
Current draw +12Vunder 25 mA, under 800 mA as USB host
Current draw −12V0 mA
ProtectionPTC fuse and diode, 10-pin power connector
List price€148.83 incl. tax, €123 before tax (Bastl Instruments store)

Watch the current-draw line: in USB host mode, the device powered by the module draws from the case’s +12V rail, up to 800 mA. Check this before plugging a power-hungry controller into a small power supply.

What it costs

The 1999 is on sale on the Bastl Instruments store at €148.83 including tax, shipped with a Eurorack power cable, a jumper cable, knurled nuts and a sticker. Anyone without a Neo Trinity has to add the price of one. Neo Trinity firmware 2.0 and 1999 firmware 1.0 can be downloaded from the product page, with release notes.

View at Thomann

What it competes with

There are plenty of ways to connect Eurorack to MIDI: dedicated MIDI-to-CV interfaces such as the Expert Sleepers FH-2 or Doepfer’s A-190 series offer more CV outputs and work on their own. The 1999 plays a different card: it takes only 2HP, needs no front-panel cables, and turns a modulation module already in the case into a two-way converter, CV to MIDI included, which many interfaces do not offer. Its limit is the flip side: without a Neo Trinity it does nothing. Other compact modulation sources, such as the WMD Modbox MKII, and the rest of our module news are in our Eurorack modules section.

Bastl Instruments’ official demo: