MIDI over TRS minijack: Type A or Type B, and how to connect them
Two wirings share MIDI over TRS minijacks: Type A, now the standard, and Type B. How to tell them apart and connect two devices without guesswork.

Synths and sequencers keep shrinking, and the bulky five-pin MIDI DIN socket no longer fits. Many devices replace it with a 3.5 mm TRS minijack, sometimes 2.5 mm. The catch: for years each manufacturer picked its own wiring, so two devices with TRS sockets do not always talk to each other. Here is how to recognise the two conventions, Type A and Type B, and connect them without guesswork.
What a MIDI cable actually carries
A standard MIDI connection uses only three of the five pins on a DIN plug. Pin 4 is the current source, pin 5 is the current sink, and pin 2 is the shield. Data travels as a current loop between pins 4 and 5: that is why the order of those two wires matters, and why a reversed cable transmits nothing.
A TRS jack has exactly three contacts: the tip, the ring and the sleeve. Three contacts for three useful pins makes the conversion easy, provided everyone agrees on what goes where.
Type A and Type B: two mirrored wirings
In August 2018, the MIDI Manufacturers Association published a specification for the use of TRS connectors with MIDI devices, which defines the pinout and the adapter cables. Its announcement explains why: with no standard, two devices could use different wiring schemes, and compatibility could not be known in advance. The wiring adopted by the standard is the one known as Type A. The other, still found on many devices, is Type B.
The only difference is that tip and ring are swapped between the two types. The shield stays on the sleeve in both. The Type B pin table is the one published in 1010music’s TRS compatibility guide; the company used that convention for a long time.
Who uses which
The list below follows 1010music’s. Treat it as a guide, not a guarantee: some brands have switched conventions between product generations, and each device’s manual remains the only reliable source.
| Convention | Examples listed by 1010music |
|---|---|
| Type A | Korg, Make Noise 0-Coast, inMusic (Akai), IK Multimedia, Line 6, ADDAC System, Arturia BeatStep |
| Type B | Arturia BeatStep Pro, older 1010music modules and blackbox, Novation products (per that list) |
| Both | 1010music bitbox mk2 and bitbox micro |
Arturia shows the trap: the BeatStep is Type A, the BeatStep Pro is Type B. The brand alone tells you nothing; check model by model.
Connecting two devices
Same type on both ends
Two devices using the same convention connect directly with an ordinary stereo TRS minijack cable, like a headphone extension. It must have three contacts: a mono (TS) cable has no ring and will not carry MIDI.
Different types
Between a Type A and a Type B device, a straight TRS cable does not work. The fix recommended by 1010music goes through DIN: a Type A adapter on the A device, a standard MIDI DIN cable, then a Type B adapter on the B device. Since the only difference is the tip and ring swap, a TRS cable with those two wires crossed does the same job in less space.
The good news: 1010music notes that connecting incompatible conventions should not damage devices designed to the MIDI specification. At worst, nothing gets through.
To a DIN socket
To connect a minijack device to a synth with a DIN socket, you need a TRS-to-DIN adapter of the right type, then a regular MIDI cable. Adapters supplied with a device are made for it: keep them, and label them.
Do not confuse it with
- The CV and Gate minijack: on a modular synth, the same 3.5 mm socket carries control voltages, in mono. That is not MIDI, and our CV and Gate guide explains the difference. Some Eurorack modules do accept MIDI over TRS: their manual then states the type.
- MIDI over USB: a different link, which goes through a computer or a USB host. Some recent instruments offer nothing else, such as the Magerit Laniakea Pro, which only receives MIDI through its USB-C port.
- The 2.5 mm size: the MMA specification covers TRS connectors in general; the few 2.5 mm devices need cables or adapters of matching size.
Before you buy: three checks
- Search each device’s manual for “Type A”, “Type B” or a tip, ring and sleeve pinout table.
- If both devices share a type, a stereo TRS cable is enough; otherwise plan for a crossed cable or a pair of adapters with a DIN cable.
- Check whether one of the devices offers a convention setting in its menus, which removes the need for any adapter.
More connection guides are collected in our setup and connectivity section, and spec-sheet vocabulary is covered in our guide to polyphonic aftertouch and MPE.
