Magerit Laniakea Pro: a polyphonic Eurorack synth that leaves the rack
Magerit’s Laniakea Pro is an 8-voice, 20 HP Eurorack module that becomes a battery-powered standalone synth. €379 for the module, €469 with the enclosure.

Madrid-based maker Magerit has released the Laniakea Pro, a polyphonic digital synth that comes in two forms: a 20 HP Eurorack module, or the same module slotted into a battery-powered enclosure that turns it into a standalone instrument. List price is €379 for the module alone and €469 with the enclosure, and it is listed as in stock. Source: Magerit’s official product page and the Laniakea Pro manual.
One module, two ways to play
The idea is simple: the module moves from rack to enclosure in about a minute, with four screws and a ribbon cable. In a Eurorack system it draws around 50 mA on +12 V and 6 mA on −12 V, and it is only 23 mm deep, so it fits even shallow skiff cases. If power budgets and HP counts are new to you, our guide to the Eurorack format and choosing a first case covers both.
Outside the rack, the enclosure adds a battery rated for more than 12 hours, a headphone output with its own volume control and a USB-C port. The module’s CV inputs stay live in both setups, so you can take the Laniakea Pro out on its own and patch it back into other modules later without changing anything.
Five engines, five textures, eight voices
Sound starts in one of five engines, all written in-house by Magerit and selected with the SHAPE button:
- Wavetable: a 16 × 16 matrix of interpolated waveforms. Wavetable synthesis sweeps through a series of waveforms to make the timbre evolve; our article on wavetable synthesis explains it in depth. The companion app loads up to 16 custom tables.
- Analog & Chiptune: a pulse wave with hard sync and a triangle that grows from 3 bits to full resolution, then morphs into a sawtooth.
- FM: frequency modulation reduced to two controls, ratio and modulation amount.
- Infinite Keys: emulations of six keyboard instruments, from piano to church organ, whose notes can ring indefinitely.
- Strings: an enhanced Karplus-Strong model, the algorithm that simulates a string with a short, filtered delay loop.
The signal then goes through one of five textures: a resonant low-pass, band-pass or high-pass multifilter, a waveshaper (from saturation to wavefolding), a modal resonator, lo-fi, and a tape delay from 1 ms to 3 s. The filter and waveshaper work on each voice separately, and every voice gets its own LPG: a low pass gate, a circuit that closes both volume and brightness together for plucked, percussive attacks. Three reverbs (Hall, FDN, Shimmer) and a Freeze function that holds the sound as a pad end the chain.
Polyphony: MIDI only
The key point before buying: over CV, the Laniakea Pro remains a single voice driven by its V/OCT input, even though the CLUSTER and CHORD controls stack up to eight waves as chords or clouds. True 8-voice polyphony, where every played note is independent, only happens when the module receives MIDI notes, and the manual states that this MIDI comes in over USB-C. The difference between these two ways of getting several notes is the one we explain between polyphonic and paraphonic synths.
There is no MIDI DIN or TRS minijack on the module: a keyboard connects over USB, through a computer, a DAW or a device able to act as a USB host. The CV inputs follow Eurorack norms: −5 V to +5 V at 16 bits, and −3 V to +7 V for V/OCT. Our CV and Gate guide explains how control voltage works.
Free app and plug-in
Magerit supplies a free standalone app and a VST3 and AU plug-in for Windows, macOS and Linux. It manages 128 factory presets recalled by Program Change, custom wavetables, scales, chords and the MIDI CC map. Firmware updates run from the Chrome browser, with nothing to install.
Magerit has published a demo recorded straight from the module:
Who it is for
- Eurorack owners who want a complete voice, effects included, in 20 HP with a modest power draw.
- Musicians on the move who play on headphones while travelling and want to fold the instrument into a rack later.
- Ambient, drone and generative players: without a keyboard, the module still produces textures thanks to CLUSTER, the global SPACE! modulation and Freeze.
- Less suited to anyone looking for a polysynth with a keyboard, or wanting to drive it over MIDI DIN from a hardware sequencer: everything goes through USB.
Price and availability
| Configuration | Magerit list price (incl. VAT) |
|---|---|
| Module only (Eurorack) | €379 |
| Module + battery enclosure | €469 |
| Enclosure only | €149 |
The module + enclosure bundle saves €59 over buying both separately, and the enclosure can be added later. Magerit lists the product as in stock on its store. View at Thomann
How it compares
- Mutable Instruments Plaits: the benchmark multi-model digital oscillator in Eurorack, narrower, but monophonic, with no MIDI, effects or reverb. Mutable Instruments stopped production in 2022; its open-source code lives on in many derivatives.
- Arturia MicroFreak: a standalone synth with a touch keyboard, a multi-engine digital oscillator and an analog filter, limited to four-voice paraphony and with no Eurorack format.
The Laniakea Pro stands out for its double life, in a rack or on battery, and for true eight-voice polyphony with per-voice processing. Its main limit is that polyphony is reserved for MIDI over USB. More new instruments of this kind are in our polyphonic synthesizers section.


